Zu den Hauptinhalten springen

Your applications

Hardening - inductive

During induction hardening, every component is separately hardened, which means that each component is separately heated, quenched and – if necessary – tempered.

The major advantage of hardening by induction, in addition to its easy integration into a production line, is the ability to control and reproduce hardening results precisely.

For this purpose, the entire hardening process – from the inductor by means of the energy and frequency introduced all the way to the quenching and tempering steps – can be specially adapted to the respective component. This makes it possible to achieve very good hardening results, even for workpieces with complex geometries.

Overview of all applications

Sample Solutions

Headed dowels

Headed dowels are used to hold and determine the position of tools and fixtures. The advantage is that it enables punctiform placement of a workpiece. The punctiform support is easy to clean and excludes the possibility of contamination caused by…

Locating pin

During the manufacturing process for all types of products, there is a need to pick up and align parts or components. Since DOCERAM locating pins are ceramic parts made from Cerazur, they are wear-resistant, electrically insulating and do not suffer…


Spacers are elements or components that hold parts in a defined position. They are used whenever a defined clearance must be created between two components or in situations where a distance must be bridged.

Gripper fingers

Gripper fingers have component-specific contours at their ends that enable them to pick up, grip, transport or guide components. They are used primarily in electronics manufacturing.