Our solutions

We demonstrably reduce machine downtimes across a range of production processes through practical component design and by providing technical advice during the process.

Low-wear components with longer service lives help increase process reliability and reduce risks during production.

The MOESCHTER Group was founded with the goal of manufacturing user-friendly products from high-performance materials. As engineering specialists, manufacturers and partners to leading automotive manufacturers, the subsidiaries DOTHERM, ISOCOS and DOCERAM currently manufacture and supply precision components based on high-performance ceramics and engineering plastics as well as non-material-specific assemblies made of steel, ceramics and plastics. Over the course of two decades, a portfolio has been created that covers a wide range of requirements for various industrial areas of use. Our components and apparatus are used primarily in plant and mechanical engineering, as well as in production and process engineering. Furthermore, we supply products to numerous other industries – from the pump industry through to medical technology.

Filter solutions:

Filter chosen: All

All
Insulating
Positioning
Picking
Surface protection
Solutions
Dosing
Trade fairs
Sliding
Gripping
Protecting
Separating
Holding

Bucks

Insulating

Bucks

We produce a range of components and parts for glass manufacturing machines and glass blowing machines, such as bucks, cooling boards, stackers, transverse belts, grippers and levers.

Spacers

Positioning

Spacers

Spacers are elements or components that hold parts in a defined position. They are used whenever a defined clearance must be created between two components or in situations where a distance must be bridged.

Headed dowels

Picking

Headed dowels

Headed dowels are used to hold and determine the position of tools and fixtures. The advantage is that it enables punctiform placement of a workpiece. The punctiform support is easy to clean and excludes the possibility of contamination caused by chippings or typical dirt between workpiece and support.

Locating pin

Picking

Locating pin

During the manufacturing process for all types of products, there is a need to pick up and align parts or components. Since DOCERAM locating pins are ceramic parts made from Cerazur, they are wear-resistant, electrically insulating and do not suffer from metal abrasion.

Coated components

Surface protection

Coated components

Components with a wide variety of coatings are characterised by different properties depending on the type and material of the coating. Many coatings are used to achieve an extended service life as well as improved chemical resistance of the component.

CAD portal

Solutions

CAD portal

Our components from high-performance ceramics can also be configured on-line. All product variants are stored in our CAD portal - you can make adjustments quickly and easily by entering the parameters for your welding process.

Spacer sleeves

Positioning

Spacer sleeves

Spacer sleeves made from high-performance ceramics are used whenever a defined clearance must be created between two components or in situations where a distance must be bridged.

Dosing components

Dosing

Dosing components

The dosing systems used in the field of dosing technology are being continuously optimized and advanced.

Flow measurement

Trade fairs

Flow measurement

One of the most important variables in industrial measurement technology alongside temperature, pressure and force is flow measurement, which is one of the fundamentals of process automation.

EuroGrippers

Insulating

EuroGrippers

The term “EuroGripper” refers, for example, to a mounting for welding tongs for spot welding, which is frequently used for car body construction. A comprehensive standard was developed for this type of machine.

Gas nozzles

Surface protection

Gas nozzles

Ceramic gas nozzles made from silicon nitride are characterised by exceptionally long service lives. In certain applications, the ceramic actually prevents the adhesion of weld spatter.

Threaded bars made of GFRP material

Insulating

Threaded bars made of GFRP material

Threaded bars made from glass-fibre reinforced plastics are suitable for a wide range of applications. The threaded bars are used to insulate threaded connections.

Slide rings

Sliding

Slide rings

Slide rings and mating rings are the two main components of a slide-ring seal. The slide ring and mating ring are in constant contact. However, they do not touch one another but slide over each other.

Slide rails

Sliding

Slide rails

If metallic materials are used for guides or rails, wear due to friction is unavoidable. Slide rails made of DOTHERM materials offer the benefits of excellent friction and sliding properties, high wear resistance and thermal stability.

Gripper fingers

Gripping

Gripper fingers

Gripper fingers have component-specific contours at their ends that enable them to pick up, grip, transport or guide components. They are used primarily in electronics manufacturing.

High-voltage insulation

Insulating

High-voltage insulation

What sets these types of insulators apart is the combination of different requirements that simultaneously apply to their implementation.

Insulating components for plastic welding technology

Insulating

Insulating components for plastic welding technology

A plastic welding process generates heat that must be insulated. The following applies: The shorter the cycle times, the greater the amount of energy that needs to be introduced into the joining zone.

Complex 3D components for thermal insulation

Insulating

Complex 3D components for thermal insulation

The manner in which these insulation materials are implemented can be as varied as the requirements placed on them: from a simple intermediate layer all the way to complex 3D components with various material combinations that are produced on a 5-axis machine.

ModulMaster Pro

Positioning

ModulMaster Pro

ModulMaster Pro welding device holds two or more (car body) components in position so that they can then be permanently joined together.

Nuts made of GFRP material

Insulating

Nuts made of GFRP material

Our nuts made from glass-fibre-strengthened plastics are available as square or hexagonal nuts.

Blank holders

Positioning

Blank holders

Blank holders serve to hold components securely in position in the application. They are typically held against a surface/contour.

Positioning pin

Positioning

Positioning pin

Positioning pins are used for the controlled positioning to extremely fine tolerances of components and moulded sheet metal parts.

Test plugs

Insulating

Test plugs

Test plugs are assemblies made from different high-performance materials. They are used as standard for reliable 100% testing of vehicle electronics by leading manufacturers in the automotive industry.

Screw head insulation

Insulating

Screw head insulation

During the process of pinning and screwing components, electrical insulation must frequently be guaranteed. Ceramic cylindrical pins ensure a positive connection while a steel screw provides for the positional connection - the interlocking connection between assemblies.

Sensor protection

Protecting

Sensor protection

Examples of sensor protection include wear caps, wear disks or wear plates, which are used to protect the sensor behind.

Bucks

Solutions

Bucks

We produce a range of components and parts for glass manufacturing machines and glass blowing machines, such as bucks, cooling boards, stackers, transverse belts, grippers and levers.

Bobbin cores

Insulating

Bobbin cores

Bobbin cores are usually round parts with a large groove into which a copper coil is wound. This coil induces a magnetic field in the centre of the coil.

Punching stamps

Separating

Punching stamps

Punching stamps must repeatedly punch a contour in a predetermined geometry into a sheet.

Cutting disks

Separating

Cutting disks

All-ceramic cutting disks have carved out a well-earned reputation in series production facilities over many years.

Forming rollers

Positioning

Forming rollers

Forming processes place very high demands on the wear resistance and stability of the tools and mountings used. High surface qualities are required.

Vacuum-tight components

Insulating

Vacuum-tight components

Many technical processes such as semiconductor fabrication, medical technology or material testing are conducted in a vacuum.

Valve needle/seat

Dosing

Valve needle/seat

The function of valves is to control or block the flow of liquids or gases. There are various types that differ depending on their application, design and mode of activation.

Goods carriers

Holding

Goods carriers

Goods carriers are used to hold other products, such as circuit boards. In many cases, they must be electrically insulating, wear-resistant and designed to cope with thermal shock to enable smooth handling.

Thermal image analysis

Trade fairs

Thermal image analysis

Thermal image analysis makes it possible to determine the precise thermal requirements of the application and to tailor the material concept precisely to them.

Heat insulation board

Insulating

Heat insulation board

DOTHERM and ISOCOS offer heat protection plates that are precisely adapted to the respective process requirements in terms of material, compression strength, temperature resistance and dimensional stability.

Non-material-specific insulation solutions

Insulating

Non-material-specific insulation solutions

In many industrial applications, it makes sense to use multi-layered materials or material combinations.

Workpiece holder/carrier

Positioning

Workpiece holder/carrier

The exact positioning of components is particularly important for series production. Here, multiple components are frequently welded, bonded, riveted, soldered, etc. at high cycle rates to form assemblies.

Centring pin

Positioning

Centring pin

Centring pins are manufactured entirely from ceramic and are used for centring nuts on metal sheets.

Cylindrical pin

Positioning

Cylindrical pin

Ceramic cylindrical pins - also referred to as dowel pins - are extremely versatile and are used as stops, as bearing shafts for idler pulleys, as printed circuit board holders or for fixture construction in welding technology.

Other solutions

Solutions

Other solutions

You didn't see a matching solution? Don’t hesitate to contact us. We work closely with our customers to develop bespoke solutions for every industry.

Back to homepage

Your challenges

We reduce machine downtimes as well as servicing costs through practical component design and by providing technical advice during the production process. We are also your contact for additional challenges.

Your applications

Here, you will find a selection of applications for which we have optimized and developed components for our customers in recent years.